Laser Cut Wooden Mandala Wall Art 30 cm | Birch Plywood Lattice Wall Decor for Living Room & Bedroom | Haoser

Laser Cut Wooden Mandala Wall Art is a 30 cm birch plywood wall panel, 3 mm thick, with an intricate whirl-pattern lattice mandala cut right through it. It is made for indoor walls and light enough to put up however suits you, and because the surface is smooth and unfinished you can also paint it in your own colours. Available in 26 designs. Made in India by Haoser.

Product overview

• Product — Round laser-cut mandala wall art panel
• Diameter — 30 cm (approx. 11.8 inches)
• Thickness — 3 mm
• Material — Birch plywood
• Designs — 26 patterns to choose from
• Surface — Smooth and unfinished, paint-ready
• Supplied as — Single panel. Hanging hardware is not included
• Build — Sturdy but very lightweight
• Use — Indoor wall decor
• Brand — Haoser, India

Why choose this mandala wall art

• Real wood, not a print. The pattern is laser cut right through the birch plywood, so the mandala throws a genuine shadow on your wall instead of sitting flat like a poster or a sticker.
• Light enough for any wall. At 3 mm the panel weighs very little, so it suits rented flats and hollow walls as readily as brick — no heavy fittings, no big holes.
• Finish it your way. Hang it natural for a warm Scandinavian look, or paint it to pick up the colours already in your room.
• Sized to group. At 30 cm it works on its own above a console or shelf, and in a set of two or three across a wider wall. With 26 designs you can mix patterns rather than repeat one.

Where it works in your home

Living room feature walls, above a bedroom headboard, hallways and entryways, home office backdrops, meditation and yoga corners, pooja and prayer room walls, and cafés, salons and studios.

Hanging and finishing

Hanging it

The panel is supplied on its own, without hanging hardware, so you can fix it in whichever way suits your wall. Because it is 3 mm birch ply and very light, you have easy options: a small nail or pin hook through one of the openings in the lattice, or double-sided foam tape or removable adhesive strips if you would rather not drill.

Mark your centre point first, aim for roughly eye level — about 145–150 cm from the floor to the middle of the panel — and check it with a level before you fix it. In a group of three, keep 15–20 cm between panels so the cut-work in each one still reads clearly.

Painting it

The surface takes acrylic paint well. Wipe the dust off first, then work in thin coats and let each one dry fully before the next. A single matte colour, metallic acrylics, or natural wood with a gold or white edge all suit this lattice pattern. Finish with a clear matte or gloss varnish if you want a surface you can wipe clean. Keep coats thin — on a 3 mm panel, heavy wet layers can cause warping.

Who it is for

• Home decorators styling a living room, bedroom or entryway
• Renters who want wall interest without heavy fittings
• DIY crafters and painters who want a ready-cut wooden base
• Anyone buying a housewarming, wedding or Diwali gift
• Cafés, salons, studios and offices decorating a wall on a budget

Care and handling

Indoor use only. Dust with a dry or barely damp cloth. Handle the finer cut-work gently — at 3 mm the thin sections of the lattice will flex. Keep it away from direct water, bathroom steam and long spells of direct sunlight, all of which affect any wood panel over time.

Frequently asked questions

What is this mandala wall art made of?

Birch plywood, with the mandala pattern laser cut right through the panel.

What size is it?

30 cm in diameter, which is roughly 11.8 inches across.

How thick is the panel?

3 mm. That keeps it light enough to hang without heavy wall fittings, which is why it suits rented flats and hollow walls.

Does it come with hanging hardware?

No. The panel is supplied on its own so you can fix it the way that suits your wall. At 3 mm it is light enough for a pin hook or small nail through one of the lattice openings, or for double-sided tape or removable adhesive strips.

Can I paint it myself?

Yes. The surface is smooth and unfinished, so acrylic paints, wood stains and varnishes all work on it. Use thin coats rather than heavy wet layers.

Is it suitable for a bathroom or for outdoors?

No. This is an indoor product. Steam, rain and standing water will damage plywood.

How many designs are available?

26 different mandala patterns, all at the same 30 cm size and the same price, selectable on this page. You can group two or three designs together on one wall.

Where can I buy wooden mandala wall art in India?

Haoser is an Indian manufacturer of wooden and MDF wall decor and craft supplies, and ships across India from haoser.com.

Does it make a good gift?

It suits housewarmings, weddings and Diwali. There is nothing to assemble — the recipient just needs a hook or an adhesive strip to put it up.

Explore more Haoser wall decor

• All Haoser wooden wall art — mandala panels, carved jali screens and decorative wall pieces
• Carved birch jali panel — a larger cut-work panel for feature walls and room dividers
• Wooden arch wall molding — for arched wall panelling projects
• Mandala coaster painting kit — if you would rather paint a mandala of your own
• All Haoser art and craft supplies